Netatmo | Operate As Docs

Connect your client's Netatmo with a sign-in, and call its API through Operate As.

Website: netatmo.com
Connects by: Signing in with Netatmo
Category: Smart home
Services: 1
Tools: Pass-through only

Service	Key	Base URL
Netatmo	`netatmo`	`https://api.netatmo.com/api`

Connecting

Your client presses Connect on their link and approves on Netatmo's own screen. Operate As never sees their password.

Check they're connected

curl https://api.operate.as/v1/me/clients \
  -H "Authorization: Bearer $OPERATE_AS_API_KEY"

curl https://api.operate.as/v1/me/clients \  -H "Authorization: Bearer $OPERATE_AS_API_KEY"

Response

[
  {
    "id": "6f1c2a7e-...",
    "name": "Miller Dental",
    "services": [
      "netatmo"
    ]
  }
]

[  {    "id": "6f1c2a7e-...",    "name": "Miller Dental",    "services": [      "netatmo"    ]  }]

Permissions

What the client reads	Permission it asks for
See your weather station readings	`read_station`
See your thermostats and valves	`read_thermostat`
Change your heating schedules and set points	`write_thermostat`
See your indoor cameras and their events	`read_camera`
See your outdoor cameras and their events	`read_presence`
See your air quality monitors	`read_homecoach`
See your smoke alarms	`read_smokedetector`

Pass-through

Netatmo has no ready-made tools yet. Call any endpoint of its API through Operate As instead, with the client's access attached.

Add the client

In Clients, add your client and select Netatmo. Then send them their link.

Your client connects

They sign in with Netatmo and approve.

Find the endpoint

Pick the call from Netatmo's own API docs. Your path is everything after https://api.netatmo.com/api.

Send it through Operate As

Use the client's ID, the service key netatmo and that path. Your Operate As key goes in Authorization; the client's access is added for you.

See Pass-through requests for the full request and response format.

Call any endpoint

curl "https://api.operate.as/v1/clients/6f1c2a7e-.../netatmo/homesdata" \
  -H "Authorization: Bearer $OPERATE_AS_API_KEY"

curl "https://api.operate.as/v1/clients/6f1c2a7e-.../netatmo/homesdata" \  -H "Authorization: Bearer $OPERATE_AS_API_KEY"

Response

{
  "status": 200,
  "data": {
    "…": "the service's own response"
  },
  "encoding": "json"
}

{  "status": 200,  "data": {    "…": "the service's own response"  },  "encoding": "json"}

When access ends

Operate As renews the sign-in before it runs out and checks it daily. If Netatmo refuses to renew it, the service shows Expired, you're alerted, and your client reconnects from the same link.

See Keeping access alive and Removing access.

Calls answer

HTTP/1.1 409 Conflict
Content-Type: application/json

{
  "detail": "Miller Dental's Netatmo access ended. Send them their link to reconnect."
}

HTTP/1.1 409 ConflictContent-Type: application/json{  "detail": "Miller Dental's Netatmo access ended. Send them their link to reconnect."}

Your webhook receives

{
  "id": "evt_3f9a1c…",
  "type": "connection.expired",
  "createdAt": "2026-10-16T08:00:00+00:00",
  "data": {
    "clientId": "6f1c2a7e-...",
    "clientName": "Miller Dental",
    "provider": "netatmo",
    "services": [
      "netatmo"
    ],
    "reconnectUrl": "https://…"
  }
}

{  "id": "evt_3f9a1c…",  "type": "connection.expired",  "createdAt": "2026-10-16T08:00:00+00:00",  "data": {    "clientId": "6f1c2a7e-...",    "clientName": "Miller Dental",    "provider": "netatmo",    "services": [      "netatmo"    ],    "reconnectUrl": "https://…"  }}